![background image](http://html1.mh-extra.com/html/omega/dps3100-series/dps3100-series_user-manual_4026492006.webp)
Page 5
DISPLAYING PARAMETERS
DPS3000 Series keeps track of various parameters and these may be displayed by pushing appropriate keys on the front
panel. The parameters that are tracked are:
a) Channel's high peak
d) Channel with the lowest reading
b) Channel's low peak
e) Process deviation of each channel from pre-programmed setpoint
c) Elapsed time
f) Process differential of a channel with respect to any other channel
c) Channel with the highest reading g) Rate of process change per minute for each channel
Table 1 explains how to display the above mentioned parameters.
Table 1. How to Display Parameters
TO DISPLAY
PERFORM FOLLOWING STEPS
1) Channel's high peak
a) Select channel whose high peak is desired (push
CH SEL
key)
b) Push
HI/LO
key once
2) Channel's low peak
a) Select channel whose low peak is desired (push
CH SEL
key)
b) Push
HI/LO
key twice --- 1st push displays high peak,
2nd push , low peak.
3) Rate of process change
a) Select channel whose rate is desired (push
CH SEL
key)
b) Push
RATE
key once.
4) Channel deviation
a) Select desired channel (by pushing
CH SEL
key)
b) Push
RATE/DIFF
key twice --- 1st push displays rate,
2nd push, deviation.
5) Channel differentials
a) Select desired channel (by pushing
CH SEL
key).
b) Push
RATE/DIFF
key three times -- 1st push displays rate,
2nd push: deviation, 3rd push : differential.
c) Each additional push moves to the differential between selected
channel and the next channel.
d) e.g. the sequence for channel 1 is: RATE, CH1-SP, CH1-CH2,
CH1-CH3, CH1-CH4, CH1-CH5, CH1-CH6, CH1-CH7
6) Elapsed time
a) Push
TIME
key.
7) Channel with highest
a) Push
HI/LO
key once
process reading
8) Channel with lowest
a) Push
HI/LO
key twice ----1st push:
high channel
process reading
2nd push:
low channel.
9) Scan
a) If the unit is holding, push the
SCN/HLD
key once.
10)Hold
a) If the unit is scanning, push the
SCN/HLD
key once.
DISPLAY MODES
DPS3000 Series has multiple display modes and can be programmed to either scan, display the channel with the highest
reading, display the channel with the lowest reading, deviation between channel's process variable and a pre-programmed
Summary of Contents for DPS3100 series
Page 26: ...Page 25 WARRANTY For Warranty information check Omega s web site at http www omega com...
Page 27: ...Page 26...
Page 28: ...Page 27...
Page 29: ...Page 28...