manualshive.com logo in svg

Omega DPG409 SERIES, User Manual, Page: 27 / 56

Share
Download
Omega DPG409 SERIES User Manual Download Page 27

Setup & Configuration

3

3-10

Figure 3-17.  Utility Program - Choose Options Screen

(1) Backlight Options
Intensity
Here you can set how bright you want the backlighting to be when on. Keep in 

mind that when used under battery power the LED brightness has a direct effect 

on the life of the battery. Keep to the lowest setting possible for your ambient 

light conditions to conserve battery power.
External Power
Here you can set the amount of time you want the backlighting to stay on when 

activated and the unit is running on external power. Note that you can only set 

the backlighting to be “Always On” when the unit is powered by an external 

power supply. When set to 60 or 300 seconds the backlight will come on and 

then turn off after the allotted time has expired. 
Battery Power
Here you can set the amount of time you want the backlighting to stay on 

when activated and the unit is running on battery power only. Note that you 

can not set the backlighting to be “Always On” when the unit is powered by 

battery power. When set to 10 or 30 seconds the backlight will come on and then 

turn off after the allotted time has expired. If backlighting is not required it is 

recommended that you select “Always Off” to preserve battery life.
(2) Front Panel Options
Disable Keypad
Select this option to turn off the front keypad buttons. If selected during setup 

the buttons will be locked and will not be activated by the magnetic stylus.

Summary of Contents for DPG409 SERIES

























































Reviews:

No comments