This automatic cold junction calibration
should be all that is necessary to calibrate
the CJ offset, however if you want to
additionally adjust the offset manually, the
/MAX and
/MIN buttons at this point
can be used to manually increase (
/MAX)
or decrease (
/MIN) the display 0.1° each
time
/MAX or
/MIN is pressed. After
each press allow several seconds to let the
display stabilize. Press MENU to save and
activate the calibration. (Meter will briefly
display
Stor
.)
The following menu items will only be
available with S4 installed.
CNFG
C F = 0
DEFAULT
CNFG
c f = 1 , 2
Functions not available
LINE 50H 60H
60H
DEFAULT
CAL = For use only by qualified
personnel with accurate calibration
equipment.
O
PERATION
2
16
