1. Advances flashing Digits
2. Advances Zones
1. Enter "FUNCTION SELECT" MODE
2. Exits "FUNCTION SELECT" MODE
3. Resets Alarm during "RUN MODE”
4.2 Button Functions
There are three flatpad buttons provided and two combinations of
buttons for separate functions.
1. Selects Digit
2. Unlock Zones scan
3. Switches Main Display Functions
&
Shift Button
Shift Button & Load Button (together)
Load Button
Advance Digit Button
19
1.
Lock zone scan during “RUN MODE”
Note! Zone scan is unlocked by the shift button,
or by an alarm condition. In alarm state zone scan can not be locked.
2.
Load set parameters into the memory
in “SET MODE”
4.3 Back of the Controller
RS-232
Port
C IN OUT NC NO C
RS-232
Z1
Z2
Z3 Z4 Z5
Z6
INPUT
LV
240V
LV
120V
LINE VOLTAGE
RELAY
Line Voltage
and Jumpers
SPDT
Relay
Connect
RS-232 Port- Cable connection (see Section 1.3)
C - Common Pin 5
IN - Input Pin 3
OUT - Output Pin 2
Relay
NC- Non-energized Closed
NO- Non-energized Open
C- Common
Line
LV- 120VAC or 240VAC cable
Jumpers- Determines voltage input (see Section 3.4)
}
9 Pin Comport
Red Wire
+
-
• • • •
• •
THERMOCOUPLES
!
WARNING! !
Line Voltage
see Pg 16
OUTPUT
20
DC Z1 Z2 Z3 Z4 C C Z5 Z5 Z6 Z6 DC
Summary of Contents for CN616TC1
Page 9: ...13 14 ...
