#5 Automatic Starter Interrupt: Default OFF. Programming this feature "on"
will cause the starter interrupt circuit to automatically engage 90 seconds after the
ignition switch is turned "off", and also 90 seconds after disarming unless the igni-
tion switch is turned "on" during the 90 second period. This feature controls the
starter interrupt circuit independently of all other system functions; the engagement
of starter interrupt will occur even if the system is in an otherwise disarmed state.
Once the starter interrupt output is activated by this feature, the system must be
armed, then disarmed with the transmitter, or placed into the Valet Mode to disen-
gage it in order to start the vehicle.
#6 Ignition Activated Override: Default OFF. This feature allows an activated
system to be overridden and disarmed by simply turning the ignition switch "on"
within 10 seconds of the system being activated. After the 10 second period, the
Selectable Code Override only can be used to disarm the system in place of the
remote transmitter.
#7 Doors Lock With Last Door Arming: Default OFF. This feature adds the
locking of the doors to feature #2; when the system automatically arms 30 seconds
after the vehicle's last door is closed, the doors will also lock.
8)
Doors Lock With Automatic Rearming: Default OFF. This feature adds the
locking of the doors to feature #3; if the system is allowed to automatically rearm
90 seconds after being disarmed from the transmitter, the doors will also lock.
Page - 32
#9 Doors Lock With Ignition: Default ON. This feature automatically locks the
vehicle's doors 1.75 seconds after the ignition switch is turned "on".
#10 Ignition "Off" Unlock #1: Default ON. This feature automatically unlocks
either the driver's door or all of the vehicle's doors instantly when the ignition switch
is turned "off". Please note that the exact operating parameters of this feature
depends upon the installation configuration of the Model One system and your vehicle's
power door lock system. As previously noted, this system is capable of being
configured to unlock only the driver's door upon disarming. Then, if desired,
pressing the transmitter's UNLOCK button again anytime thereafter (unless the sys-
tem is armed again or the ignition switch is turned "on") will unlock all of the doors.
Therefore, this feature can operate one of two ways: first, if all of the doors unlock
upon disarming the system with the transmitter, this feature will unlock all of the
doors when the ignition is turned "off". Second, if your vehicle is configured to unlock
the driver's door only upon disarming, this feature will unlock only that door upon
turning the ignition "off". Please consult with the installer as to the feasibility of
adding the driver's door only unlock configuration to your vehicle, as power door
locking systems differ in compatibility to this feature. If the second configuration
discussed above is present, the next feature allows the option of unlocking of all of
the doors when the ignition is turned "off".
#11 Ignition "Off" Unlock #2: Default ON. As discussed in the previous feature,
your security system is capable of a second door unlock output. If your system is
Page - 33
configured to unlock only the driver's door upon disarming with the transmitter, this
feature may be utilized. This feature, when activated, will unlock all of the doors,
after the driver's door, when the ignition switch is turned "off".
#12 Open Door Bypass To Previous Three Features: Default ON. This feature
only operates in conjunction with the previous three feature's ignition-activated door
locking operations. Programming this feature on, along with the any of the previous
three features, will cancel any automatic doorlock operations associated with the
ignition switch if a door is open at the time the ignition switch is turned "on" or "off".
For example, if the system is programmed to unlock the doors when the ignition is
turned "off", if a door is opened before turning the ignition "off", the doors will not
automatically unlock.
#13 Confirmation Chirps: Default ON. This feature removes the audible arming
and disarming confirmation horn chirps (or optionally, siren chirps). This feature is
the "full time" removal of the confirmation chirps; the silent operation may be achieved
on a onetime temporary basis by pressing and releasing the transmitter's OPTION
button twice when arming or disarming the system. Even if this feature is used to
remove the confirmation chirps, the audible Automatic Transmitter Verification
TM
fea-
ture will still operate as described on page 23.
#14 Confirmation Chirps While In Valet Mode: Default OFF. While the system
is in the Valet Mode, the transmitter will still remotely lock and unlock the vehicle's
Page - 34
doors. This feature adds the confirmation horn chirps if the transmitter is used to
lock or unlock the doors while the system is in Valet Mode.
#15 Activated Alarm Cycle 60 or 30 Seconds: Default 60 Seconds. This feature
offers a choice of activated alarm durations. When programming, please note that
pressing the remote transmitter's LOCK button sets the cycle at 60 seconds, and
pressing the UNLOCK button sets the 30 second time.
#16 Lights On Upon Disarm 5 or 30 Seconds: Default 30 Seconds. This feature
sets the length of time that the parking (and interior lights with the UltraOne) stay on
upon disarming the system. The longer time allows inspection of the area around
and inside the vehicle when dark. When programming, please note that pressing the
remote transmitter's LOCK button sets the lights being on for 5 seconds, and press-
ing the UNLOCK button sets the 30 second time.
#17 Disarm Alarm Upon Trunk Release: Default ON. This Feature automati-
cally disarms the system when the OPTION button is pressed to operate the Option
Output, or trunk release. If this Feature is turned off, the trunk release will still
operate, but the system will remain armed. When this feature is on, activating the
trunk release will be accompanied by two horn chirps to confirm disarming; when off
there are no confirmation chirps.
Page - 35
