background image

zones will be shown in the order of the violation.

-

Flash-2x & Pause

= System was activated from the hood or trunk circuit.

-

Flash-3x & Pause

= System was activated from the door circuit.

-

Flash-4x & Pause

= System was activated from the optional sensor input.

-

Flash-5x & Pause

= System Prewarned from the optional sensor input.

Page - 17

This system has programmable audible output which allows utilization of the

vehicle's existing horn; as an option, an optional electronic siren may be used, as with
the UltraOne.  Also, the vehicle's parking lights and, in some cases, the interior light
are utilized to indicate a number of events or processes associated with the system's
operation:

-

One horn chirp and one light flash: 

The system has started a passive Last Door

Arming countdown and will become armed after the countdown expires. This
chirp indicates that the starter interrupt, if present, will engage and the doors will
lock, if programmed to do so, when the system becomes armed 30 seconds later.

-

One horn chirp, one light flash, and the doors lock (if programmed):

 The system

has armed passively from the optional Last Door Arming feature or actively from

Audible  and  Visual  Indicators

the transmitter. The starter interrupt, if present, has engaged and the doors have
locked. The system will become fully armed 3 seconds later.

-

One horn chirp after the previous arming chirp: 

The optional sensor circuit is

bypassed from pressing the transmitter OPTION button within 3 seconds after
pressing the transmitter LOCK button to arm the system.

-

Two horn chirps, the lights stay on for 30 seconds and the doors unlock: 

The

system has just disarmed.

-

Two horn chirps and no light activity: 

The system has just entered the Valet Mode.

-

Four horn chirps, four light flashes before staying on for 30 seconds and the doors
unlock:

 The system has just disarmed and was activated while you were away.

The system will have this disarming confirmation until the ignition is turned "on".

-

Three horn chirps, the lights flash three times and the doors lock: 

The system has

been actively armed with a protected entry open or an optional sensor activated.

-

Horn sounding, pausing every 10 seconds, and lights flashing on and off:

 The

system has detected an intrusion attempt and is in an activated state.
Note: Optionally, and with the UltraOne, the siren will continually sound, changing
tones every 5 seconds.

-

A series of horn chirps lasting two seconds after the ignition switch is turned "on":
The Automatic Transmitter Verification

TM

  feature (page 23) has been activated.

This will occurs for 48 hours after installation or transmitter programming.

-

A series of horn chirps lasting 1.5 seconds while the system is armed: 

The

Prewarning feature has been activated. This will also relock the doors.

Page - 18

 Option Output ("Trunk Release") and Additional Output

Your Model One vehicle security system can have up to two additional outputs

which offer additional convenience features. The first of these outputs, the "Option
Output
", is standard with the UltraOne and is programmed to disarm the system when
it is utilized.  The most common use for the Option Output is remotely-activated trunk
release. This output is activated by pressing and holding the transmitter's OPTION
button for two seconds, except when the ignition switch is "on".  However, this output
may be operated when the ignition switch is "on" if the vehicle has a door opened.  The
Option Output is also operable while the system is in Valet Mode.

If the OPTION button is pressed for 2 seconds and then released, the output will

be momentary.  If the OPTION button is held depressed, the output will remain for as
long as the button is held, for up to 15 seconds.  The extended output operation is
useful for custom applications.

The further Additional Output is activated by pressing and holding the transmitter's

LOCK button for 2 seconds.  Of course, the system will arm as soon as the LOCK
button is pressed. This output can also be activated for up to 15 seconds, as long as
the transmitter's LOCK button is held. This output is ideal for an optional remote
starting unit.  If desired, the Additional Output can be operated by the PANIC button;
this is a programmable feature, and explained on page 39.

Page - 19

This device complies with FCC Rules part 15. Operation is subject to the following two
conditions, (1) This device may not cause harmful interference and, (2) This device must
accept any interference that may be received, including interference that may cause undesired
operation.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user's authority to operate
the equipment.

Products manufactured and sold by OMEGA RESEARCH & DEVELOPMENT, INC. (the Company), are

warranted to be free from defects in materials and workmanship under normal use.  If a product sold by the Company
proves to be defective, the Company will repair or replace it free of charge within the first year and  thereafter all parts
to be repaired will be free with only a nominal charge for Omega Research and Development, Inc.'s labor and return
shipping, to the original owner during the lifetime of the car in which it was originally installed.

All products for warranty repair must be sent postage prepaid to Omega Research & Development, Inc., P.O.

Box 508, Douglasville, Georgia 30133, with bill of sale or other dated proof of purchase. This warranty is nontransferable
and does not apply to any product damaged by accident, physical or electrical misuse or abuse, improper installation,
alteration, any use contrary to its intended function, unauthorized service, fire, flood, lightning, or other acts of God.

This warranty limits the Company's liability to the repair or replacement of the product. The Company shall

not be responsible for removal and/or reinstallation charges, damage to or theft of the vehicle or its contents, or any
incidental or consequential damages caused by any failure or alleged failure of the product to function properly. Under
No Circumstances Should This Warranty, Or The Product Covered By It, Be Construed As A Guarantee Or Insurance
Policy Against Loss. The Company neither assumes nor authorizes any person or organization to make any Warranties
or assume any liability in connection with the sale, installation, or use of this product.

L I M I T E D     L I F E T I M E     W A R R A N T Y

MO_MODEL#1.2

Summary of Contents for ClassicOne











Reviews: