Using a simple programming process, extra or replacement transmitters are easily
added to your security system. To access the Transmitter Programming Mode,
follow this procedure:
Step 1 -
Turn the ignition "on". Within 7 seconds , press the valet switch 5 times.
The system will respond by briefly sounding the horn once.
Step 2a - Factory-set Selectable Code Override of one and no presses of the valet
switch: press the valet switch equal to the Selectable Code Override number for
stage #1 (the factory setting is one press). The system will respond by briefly
sounding the horn and then two chirps, in which case proceed to Step 4.
Step 2b - Customized Selectable Code Override: press the valet switch equal to the
Selectable Code Override number for stage #1. The system will respond by
briefly sounding the horn and then one chirp. You now have 8.5 seconds to initiate
the Step 3.
Step 3 -
Momentarily press the valet switch equal to the Selectable Code Override
number programmed for stage #2. The system will acknowledge the entry by
sounding the horn and then two chirps.
Step 4 -
Now press the LOCK button on each transmitter to programmed. The
system will respond to each with a brief sounding of the horn and a chirp, with
subsequent chirps increasing in number as each transmitter is entered; the
maximum being four chirps after the brief sounding of the horn when the fourth
transmitter, if presented, is acknowledged.
Page - 24
Turning the ignition switch "off", or 15 seconds of no programming activity, will cause
the system to exit the Transmitter Programming Mode, which the system will indicate
by briefly sounding the horn twice.
Your Model One vehicle security system has 28 features which may be pro-
grammed to suit your needs via the Features Programming Mode. This is accessed
by turning the ignition switch "off" and pressing the valet switch five times. Once in
Features Programming Mode, the valet switch is further used to specify which of the
28 features is to be changed, then the transmitter is used to change the selected
feature's setting.
To access the Features Programming Mode, follow these steps:
Step 1 - Within 5 seconds of turning the ignition "off", momentarily press the valet
switch 5 times. The system will respond by briefly sounding the horn.
The Selectable Code Override must be entered within the next 10 seconds.
Step 2a - Press the valet switch the correct number of times to enter the Selectable
Code Override. The factory-set default is one press for stage #1 and no press
for stage #2. If the system is configured with the default setting, it will respond
by sounding the horn for a short period, followed by two chirps. In this case
proceed directly to Step 3.
Programming Features
Page - 25
Step 2b - If the system has had the Selectable Code Override custom-programmed,
once stage #1 been properly entered (which can be up to nine valet switch
presses) the system will acknowledge the entry by sounding the horn for a short
period, then one chirp. You now have 8.5 seconds to initiate stage #2 of
completing the entering of the Selectable Code Override. Momentarily press the
valet switch equal to the number programmed for stage #2. The system will
acknowledge a successful entry by sounding the horn for a short period, then two
chirps.
Step 3 - You now have 15 seconds in which access the desired feature. This done
by pressing the valet switch the number of times that equal to feature number. For
example, to utilize the optional siren, the audible output must be changed from
pulsed to steady. This is the twenty-first feature on the list, and therefore to
access it, you must press the valet switch 21 times. The system will acknowledge
the valet switch entry by chirping the horn a like number of times equal to the
valet switch presses; in this case 21 chirps will indicate access to the twenty-first
feature.
Step 4 - You have 15 seconds to change the chosen feature. Press the transmitter's
LOCK button to turn the feature "on", or press the UNLOCK button to turn the
feature "off". Turning the feature "on" is indicated by one horn chirp; turning the
feature "off" is indicated by two horn chirps.
Page - 26
Once a particular feature has been configured to the desired setting, the next
feature to be programmed may be accessed by repeating Step 3; i.e. press the valet
switch equal to the number of the next feature. As each is programmed, proceed to
access each in turn for programming until finished.
If 15 seconds expire without programming activity (i.e.- not pressing the LOCK or
UNLOCK buttons or pressing the valet switch to select another feature), the system
will exit the Features Programming Mode, which is indicated by the horn sounding
twice. If two failed attempts are made to enter the Features Programming Mode, two
minutes must expire before another attempt can be made.
The 28 Programmable Features, their factory-set default settings, and the
transmitter button which equals the default setting are as follows:
#1
Selectable Coded Override: Default 1 & 0 (see pages 29-30).
#2
Last Door Arming: Default OFF (UNLOCK).
#3
90 Second Automatic Rearming: Default OFF (UNLOCK).
#4
Starter Interrupt Circuit: Default ON (LOCK).
#5
90 Second No Ignition Starter Interrupt: Default OFF (UNLOCK).
#6
Ignition Activated Override: Default OFF (UNLOCK).
#7
Doors Lock With Last Door Arming: Default OFF (UNLOCK).
#8
Doors Lock With 90 Second Automatic Rearming: Default OFF (UNLOCK).
#9
Doors Lock With Ignition: Default ON (LOCK).
#10 Ignition OFF Unlock #1: Default ON (LOCK).
Page - 27
