5
MAX Mode
Pressing the Max key to enter the MAX mode. The thermometer then
records and updates the maximum absolute values and the MAX annunciator
appears on the display. Pressing the MAX key again to exit the MAX recording
mode.
T1 , T2 Temperature Measurement
1. The function switch indicates which input is selected for display; T1
thermocouple, T2 thermocouple.
2. Connect a type K thermocouple to the jack on the instrument. Place the
probe or thermocouple tip on or in the material to be measured and take the
temperature reading directly from the display.
Thermocouple Calibration
1. Connect the proper K-type thermocouple wire and miniature male SMP
connector to the CL3512 output.
2. Connect the other end of the thermocouple wire to the instrument to be
calibrated.
3. Using the range switch and the COARSE / FINE adjust knobs set the
CL3512 to the output required as read on the LCD.
4. If output over -40°C to 1350°C ( -40°F to 2000°F ) range, Please refer to
Other Type Thermocouple Calibration.
