![background image](http://html1.mh-extra.com/html/omega/cl300a/cl300a_user-manual_737626003.webp)
1
CL300A
1. Introduction
The OMEGA CL300A is designed to be a simple to use, high accuracy
thermocouple calibrator capable of either simulating or reading J, K, T, L, E,
R, S, T, B, C, or mV thermocouple types. A standard thermocouple mini-
connector along with screw terminals for bare wire makes connections easy
while providing direct contact with the internal cold junction compensation
circuitry.
When used as a thermocouple simulator, the CL300A provides control
which allow the user to either “step” in increments or decades.
1.1 Customer Service
OMEGA
Engineering
Tel: (203) 359-1660
Fax: (203) 359-7811
www.omega.com
email: [email protected]
1.2 Unpacking
Remove the packing list and verify that all equipment has been received. If
there are any questions about the shipment please call OMEGA at 1-800-
826-6342. When the shipment is received inspect the container and
equipment for any signs of damage. Note any evidence of rough handling
in transit. Immediately report any damage to the shipping agent.
NOTE: The carrier will not honor any claims unless all shipping material is
saved for their examination. After examining and removing contents, save
packing material and carton in the event reshipment is necessary.
1.3 Safety information
Symbols Used
The following table lists the International Electrical Symbols. Some or all of
these symbols may be used on the instrument or in this manual.