Appendix H
Telnet Setup
Telnet stands for Telecommunications Network, it is a protocol that provides a way
for users (or clients) to connect to computers (or servers) on a network, whether in
the next building or across the other side of the world.
You can open a Telnet session using other terminal emulation programs like Tera
Term Pro (downloadable from the internet), which is a free software for MS-
Windows. It supports VT100 emulation, Telnet connection and serial port connection.
Once the Telnet mechanism is decided we can open a session by simply typing the
IP address of the iServer, and setting the Port on
2002
for logging into the iServer
Configuration page, or
2000
for accessing the serial device connected to the
iServer’s serial port.
Admin Port 2002
Parameters
Figure H-1
Tera Term Telnet Connection Screen
Figure H-2 Telnet Setup
The default password for Telnet Login is 00000000 and can be
changed if desired.
In the Configuration mode you can make any changes just like you would using the
Web Browser. After connected to the iServer, the user can use the following
commands to read, modify, and get help from the iServer console.
p
Following with a return character, the console will show the iServer
configurations (
Figure H-1
).
?
Following with a return character, the console will show all the
commands and options (
Figure H-2
).
53
Administrator Password?00000000
iSeries >p
Model:
iSeries-EIT
Firmware Ver:
BD:
9600 (6)
DT:
7 bits (3)
PT:
Odd (3)
ST:
1 bit (1)
FC:
None (1)
DP:
Disabled (0)
MC:
00:03:34:00:D9:A2
IP:
192.168.10.87
SM:
255.255.255.0
GW:
192.168.10.50
LP:
12345678
SP:
00000000
CP:
TC:
Enabled (1)
WS:
Enabled (1)
iSeries>
Summary of Contents for C4EIT
Page 2: ......