4.5.8.1 Device Parameters -C4EIT
After clicking on any of the numbers (1 through 8), you will be directed to the
DEVICE PARAMETERS page.
Device name -
This field allows you to enter the device name and can take up to
eight alphanumeric characters. Default is blank.
Device address -
This column only appears for RS485 (-C4EIT). Device address or
ID is in HEX format. See
Appendix D
for conversion. Default is blank.
Reading command -
This field is where the actual command is typed.
The iServer will send this command to the serial device as soon as the READINGS
page link is clicked. Default is blank.
Setpoint -
This field is where the setpoint command is typed.
Response unit -
This field is the response unit and can take up to eight alphanumeric
characters. Default is blank.
Display format -
How the value appears on the READINGS page; choice of
raw
which
includes the command or
decimal
which just shows the value.
Figure 4.16 iServer DEVICE PARAMETERS Page (-C4EIT)
In RS485 connection, the RS485 node number must be typed before the actual command.
Example:
*01
is the RS485 node number 1 and the
X01
is the actual command
requesting temperature value.
31
Summary of Contents for C4EIT
Page 2: ......
