background image

 

 

OMEGA ALTISE 

 

IMPORTANT SAFETY INSTRUCTIONS 

 

IMPORTANT:  Read the safety precautions of this booklet carefully before attempting to assemble, install, operate or 

maintain the product described.  Protect yourself and others by observing all safety information.  Failure to 
comply with instructions could result in personal injury and/or property damage.  If you are unsure about 
anything regarding your appliance or these instructions, please contact Omega Altise on 1300 795 572 in 

Australia or (09) 415 6000 in New Zealand before operating your appliance. 

1.

 

Read all instructions carefully before using the misting fan.  

2.

 

Use this misting fan only as described in this manual. Any other use not recommended by the manufacturer may 
cause fire, electrical shock, or injury to persons. Do not modify this appliance. Do not try to repair this appliance 
– there are no user serviceable parts within. 

3.

 

Remove the packaging and ensure that the appliance is undamaged (keep packing box for later storage).  Take 

care to remove all packaging inside the guards & around the mist outlet. In case of doubt do not use the 
appliance and contact Omega Altise Service.  Do not let children play with any parts of the packaging

4.

 

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental 
capabilities, or lack of experience or knowledge, unless they have been given supervision or instruction concerning 
the use of the appliance by a person responsible for their safety.  Children should be supervised to ensure that they 
do not play with the appliance. Extreme caution is necessary when the misting fan is used by or near children or 

individuals with decreased mental and physical capacity and whenever the misting fan is left operating unattended. 

5.

 

Before you use the appliance, check if the voltage marked on the rating label corresponds to the mains in your 
home. The appliance must be connected to a grounded power supply. 

6.

 

Do not use this appliance with a programmer, timer or any other device that switches the appliance on 
automatically, since a fire risk exists if the appliance is covered or positioned incorrectly. 

7.

 

Do not pull the power cord to disconnect with the power source. Always grasp the plug to pull it out. Do not remove 

the plug from the power source with wet hands or if water has spilt on the ground where you are standing. 

8.

 

Do not run power cords under rugs or other combustible materials. Do not place power cords in areas where they 
can be a tripping hazard. 

9.

 

Do not insert any objects into the appliance as it may cause an electric shock or fire or damage to the appliance. Do 
not block or tamper with the appliance in any manner while it is in operation. To prevent a possible fire, do not 
cover the appliance in any manner. Do not place on soft surfaces, like a bed, where openings may become 

blocked. 

10.

 

Do not leave the appliance unattended. Always unplug the appliance when not in use. Take care that it is not 
obstructed when oscillating. 

 

WARNING:   

The Function Switch should not be used as the sole means of disconnecting power. Always unplug 
the power cord before servicing or moving the appliance.   

11.

 

Keep materials such as hair, net curtains, tablecloths & clothes away from the openings of the misting fan, as 
material may be sucked into the appliance causing injury, damage to property or the appliance.  

12.

 

The appliance has hot and arcing or sparking parts inside. It must NOT be used in potentially dangerous locations 
such as flammable, explosive, chemical-laden, corrosive, salty or wet atmospheres. This appliance is intended for 

general indoor domestic use ONLY.  

13.

 

This appliance is not intended for use in wet or damp locations. Never locate it where it may fall into a bathtub or 
other water container.  

14.

 

Do not use the misting fan outdoors. Do not use close to windows or in direct sunlight.  

15.

 

Always place the appliance on flat, stable surfaces before use. Always place the appliance vertically on its base 

16.

 

The water depth sensor will turn the misting function off if it detects the water in the tank has run out. Do not fill 

with any other liquid than water, or water over 40

C. 

 
 

 
 
 

WARNING:   To avoid danger of electric shock, unplug from outlet when not in use and before cleaning or refilling the 

water reservoir. If the supply cord is damaged, it must be replaced by the manufacturer, its Service Agent or 

similarly qualified persons in order to avoid a hazard.  In order to avoid overheating, do not cover the 
appliance.  Do not use the appliance in the immediate surrounding of a bath, shower or swimming pool. 

 

Summary of Contents for altise AM360R









Reviews: