The primary function of the Easy Valet
T M
Switch is to enable you to enter your security
system into the Valet (override) Mode, which prevents the system from arming. You will
find this useful when stopping at service stations, having your vehicle serviced, having your
car valet parked or while having your car washed. As discussed on Page 6, the
Easy Valet
T M
Switch, in conjunction with the ignition key, can be used to temporarily disarm the system
should your transmitter be lost or become inoperable. The Easy Valet
T M
Switch is normally
mounted in an unobtrusive location that is accessible to the driver. Be sure your dealer
indicates the location of the Easy Valet Switch
T M
to you to avoid potential inconvenience.
There are two procedures to follow to enter the Valet Mode. Normally, the ignition key
is required to enter and exit the Valet Mode. With Easy Valet
T M
the ignition key is only
required while disarming the system when the transmitter is not available.
Operating The Easy Valet
T M
: This unique feature can be activated anytime the system
is not in an armed state. This patent-pending feature allows you to enter the Valet Mode by
simply depressing the Easy Valet
T M
switch. However, if the system is armed or in the
triggered state, the ignition must be turned "On" and then the Easy Valet
T M
Switch pressed
within 5 seconds to disarm the system by entering the Valet Mode.
Simply press and hold the Easy Valet
TM
Switch for 2 seconds to activate the Valet Mode.
The system will confirm that it is in the Valet Mode by honking the horn (or chirping the
siren twice), flashing the parking lights twice and the LED Status Indicator turning on
constant. The security system will hold memory of the Valet Mode when the ignition switch
is "On" or "Off". While in the Valet Mode the system will not arm but the Panic feature and
the remote locking and unlocking of doors from the transmitter will still function. In
addition, the doors locking
U s i n g T h e E a s y
V a l e t
T M
S w i t c h
Page - 9
The primary function of the Easy Valet
T M
Switch is to enable you to enter your security
system into the Valet (override) Mode, which prevents the system from arming. You will
find this useful when stopping at service stations, having your vehicle serviced, having your
car valet parked or while having your car washed. As discussed on Page 6, the
Easy Valet
T M
Switch, in conjunction with the ignition key, can be used to temporarily disarm the system
should your transmitter be lost or become inoperable. The Easy Valet
T M
Switch is normally
mounted in an unobtrusive location that is accessible to the driver. Be sure your dealer
indicates the location of the Easy Valet Switch
T M
to you to avoid potential inconvenience.
There are two procedures to follow to enter the Valet Mode. Normally, the ignition key
is required to enter and exit the Valet Mode. With Easy Valet
T M
the ignition key is only
required while disarming the system when the transmitter is not available.
Operating The Easy Valet
T M
: This unique feature can be activated anytime the system
is not in an armed state. This patent-pending feature allows you to enter the Valet Mode by
simply depressing the Easy Valet
T M
switch. However, if the system is armed or in the
triggered state, the ignition must be turned "On" and then the Easy Valet
T M
Switch pressed
within 5 seconds to disarm the system by entering the Valet Mode.
Simply press and hold the Easy Valet
TM
Switch for 2 seconds to activate the Valet Mode.
The system will confirm that it is in the Valet Mode by honking the horn (or chirping the
siren twice), flashing the parking lights twice and the LED Status Indicator turning on
constant. The security system will hold memory of the Valet Mode when the ignition switch
is "On" or "Off". While in the Valet Mode the system will not arm but the Panic feature and
the remote locking and unlocking of doors from the transmitter will still function. In
addition, the doors locking
U s i n g T h e E a s y
V a l e t
T M
S w i t c h
Page - 9
the security system is disarmed or in Valet Mode.
4) Two horn honks or siren chirps and lights stay on for 60 seconds: The security system
has just disarmed.
5) Two horn honks or siren chirps and two light flashes: The security system has entered
the Valet Mode.
6) Three horn honks or siren chirps and three light flashes: The system is arming with a
protected circuit still open (such as the hood or trunk) or an optional sensor in a triggered
state, and indicating that these circuits will be bypassed.
7) Four horn honks or siren chirps & four light flashes, then the lights stay on 60 seconds:
The security system has just disarmed and was triggered and reset while you were away.
8) Three horn honks or siren chirps and the lights flash once while the security system is
armed: The Prewarn feature has been activated.
Page - 12
the security system is disarmed or in Valet Mode.
4) Two horn honks or siren chirps and lights stay on for 60 seconds: The security system
has just disarmed.
5) Two horn honks or siren chirps and two light flashes: The security system has entered
the Valet Mode.
6) Three horn honks or siren chirps and three light flashes: The system is arming with a
protected circuit still open (such as the hood or trunk) or an optional sensor in a triggered
state, and indicating that these circuits will be bypassed.
7) Four horn honks or siren chirps & four light flashes, then the lights stay on 60 seconds:
The security system has just disarmed and was triggered and reset while you were away.
8) Three horn honks or siren chirps and the lights flash once while the security system is
armed: The Prewarn feature has been activated.
A u t o m a t i c F u n c t i o n s A n d F e a t u r e s
1) Parking Lights Stay On For 60 Seconds After Disarming: After disarming the
security system, the parking lights will turn on and stay on for sixty seconds before
automatically turning off. This feature lights the way to your vehicle.
2) The Doors Will Instantly Lock If The Security System Is Triggered (Patent
Pending):
If a thief triggers the security system the doors will automatically relock. If
a door is opened, this advanced feature will wait for the door to shut and then relock the
doors. This feature requires the installation of an optional doorlock interface.
3) 90 Second Automatic Rearming: Should you unknowingly activate your transmitter,
which results in the doors unlocking and the security system disarming, the system will
Page - 12
A u t o m a t i c F u n c t i o n s A n d F e a t u r e s
1) Parking Lights Stay On For 60 Seconds After Disarming: After disarming the
security system, the parking lights will turn on and stay on for sixty seconds before
automatically turning off. This feature lights the way to your vehicle.
2) The Doors Will Instantly Lock If The Security System Is Triggered (Patent
Pending):
If a thief triggers the security system the doors will automatically relock. If
a door is opened, this advanced feature will wait for the door to shut and then relock the
doors. This feature requires the installation of an optional doorlock interface.
3) 90 Second Automatic Rearming: Should you unknowingly activate your transmitter,
which results in the doors unlocking and the security system disarming, the system will
