background image

OMEGA PRODUCTS, INC. 

Omega Juicer Model 8003/8005 Nutrition Center 

 
Omega Products, Inc. warrants this juicer to be free from defects of workmanship and material 
under normal use and service. The juicer is required to be operated solely on the electric current 
indicated on the unit. Damage or malfunction caused by use on other electrical current is excluded 
from this warranty. This warranty is limited to repair or replacements of original parts, which, in the 
opinion of Omega Products, Inc. are defective in workmanship or material. 
 
Should such a defect be discovered within ten (10) years from date of purchase, Omega Products, 
Inc. will, upon receipt of machine, shipped prepaid, repair such defect and return the unit prepaid. 
This warranty does not cover breakage of any part in shipment or damage caused by misuse. 
 
A service charge of $10.00 must accompany any unit over one (1) year old. For service, send juicer 
or part to: 

 

Omega Products, Inc. 

6291 Lyters Lane, PO Box 4523 

Harrisburg, PA 17111 

 

For additional service or operational information please contact Omega Products, Inc. directly. 

 

Phone:  717.561.1105   

Fax-717.561.1298 

Web Site: 

www.omegajuicers.com

 Email: 

[email protected]

 

 

?

------------------------------------------------------------------------------------------------------------------ 

 

Registration and Guarantee Record 

 

??

Omega Model 8003 

??

Omega Model 8005 

 

Serial Number   

 

 

 

 

 

 

 

Name   

 

 

 

 

 

 

 

 

Address 

 

 

 

 

 

 

 

 

City 

 

 

 

State   

Zip Code 

 

 

Phone ( 

)  

 

 

 

 

 

 

 

Purchased From 

 

 

 

 

 

 

 

City 

 

 

 

State   

 

 

 

 

Date of Purchase 

 

 

 

 

 

 

 

 

IMPORTANT 

 

To protect your purchase, fill out and mail this form within thirty (30) days of juicer purchase.  

 

Summary of Contents for 8003













Reviews: