ASSEMBLY INSTRUCTIONS
For Juicing
STEP 1
Place the auger into the drum. Insert the juicing screen into the drum with the protruding
tab at the bottom. Place the drum cap
onto the drum end and turn it counterclockwise until it is
firmly in place.
STEP 2
Connect assembled drum set with main body by inserting the visible part of the metal shaft
into the hex area on the main body. Secure by turning the locking clip clockwise. Place the hopper
onto the drum.
STEP 3
Place juice bowl and waste bowl under drum set. Plug power cord into wall outlet. Press
the power switch down on the ON side of the switch.
For All Non-Juicing Functions
STEP 1
Place the auger into the drum. Insert the blank into the drum with the protruding tab at the
bottom. Insert the appropriate nozzle into the inside of the Drum Cap. Place the drum cap
onto the
drum end and turn it counterclockwise until it is firmly in place.
STEP 2
Connect assembled drum set with main body by inserting the visible part of the metal shaft
into the hex area on the main body. Secure by turning the locking clip clockwise. Place the hopper
onto the drum.
STEP 3
Place the two bowls under the drum set. Plug the power cord into wall outlet. Press the
power switch down on the
ON
side of the switch.
Congratulations!
You are ready to use your
Omega 8003/8005 Nutrition Center
. All items will
be placed down the feed chute. Use the plunger to press the items into the chute. Leave the machine
running while you process the items. When juicing, the juice will exit the bottom of the drum and
the pulp will exit out the end of the drum cap. For all other functions, everything will exit through
the end of the drum cap.
STEP 4
DO NOT
place any metal objects into the hopper.
DO NOT
place any ice cubes into the
hopper. If drum set is clogged or the machine stops operating, press the reverse button 2 to 3 times
and press the
ON
button again to resume normal operation.
STEP 5
Switch the juicer
OFF
before changing or touching any moving parts. Remove the drum
set from the main body by turning the locking clip counterclockwise. Remove the Drum Cap by
turning clockwise and pull out the screen/blank. Pull the auger forward to disassemble it from the
drum set. After each juicing session, wash all parts in warm soapy water.
All of the removable parts are dishwasher safe. Do
NOT
place the motor housing into the
dishwasher.
Do
NOT
run juicer more than 30 minutes continuously at any on time.
