![background image](http://html.mh-extra.com/html/omega/41003/41003_operating-instructions-and-parts-manual_736988004.webp)
OPeRAtIOn
Ensure the transmission is centered on the jack. An off-center transmission could cause the jack to tip over
resulting in personal injury or property damage. For your safety, do not exceed 10 degree tilt angle of the
saddle assembly in all directions.
Keep safety strap secured. Be sure all tools and personnel are clear before lowering load.
Raise saddle:
1. Pump lift pedal until saddle reaches desired position.
2. Follow vehicle manufacturers recommended procedures for removing the load as outlined in vehicle service
manual or repair guide.
3. Secure load with nylon strap.
4. Ensure load’s center of gravity is centered on the saddle, load is stable and in lowest position before moving
jack.
Lower saddle:
1. Slowly, gently apply downward pressure to the release valve pedal until the load is completely lowered.
2. Immediately transfer the load to an appropriate repair fixture.
!
!
4
!
WARNING
•
Read, understand, and follow
all printed material provided with and on this product
before use
.
•
do not
exceed rated capacity.
• Use
only
on hard, level surfaces.
•
Adequately support the vehicle before starting repairs.
• If loaded jack must be moved, make certain that load is secured by appropriate means, is stable, is in
the
lowest possible position
, is moved over a smooth, hard level surface and that the l
ifting platform
is level
.
• Use of this product is
limited to removal, installation, and transportatio
n of
automotive and light
truck transmissions, transfer cases and transaxles
.
• Use only adapters / accessories provided by the manufacturer of this transmission jack.
• Use only adapters / accessories whose
rated capacity is greater
than the rated capacity of this jack.
• Ensure the center of gravity is
center loaded
on the saddle.
• Never use this device as a work/repair station.
transfer
the
load immediately
to a suitable work station.
• Do not modify this product.
•
Failure to heed
these markings may
result
in
personal injury and/or property damage
.
To avoid
crushing and related injuries
:
•
never
work on, under or around a load supported only by hydraulic jack.
•
Be alert
and
sober
when using this product. Do not operate under the
influence of drugs or alcohol.
!
WARNING