omega altise
Remote Control
Press this button to turn the unit on/off
.
Press this button to set the timer
.
Press this button to make the vertical louvre
swing automatically
Change the temperature display from
Celsius to Fahrenheit
.
APC15:
cooling only
model
Press this button to choose Cool mode
.
Press this button to choose Heat mode (DAC15HH model)
.
Press this button to choose Dry (dehumidifying) mode
.
Press this button to choose Fan mode
.
Press Up or Down button to set temperature
or adjust the time in Timer mode
.
Press this button to select high fan speed.
Press this button to select medium fan speed
.
Press this button to select low fan speed
.
Press this button to set energy saving mode (only in Cool and Heat mode)
.
Operating Instructions
Fan Mode
The Fan or ventilation mode “moves” the air allowing for the recycling of air much like a general fan.
•
Press
MODE
button or
to choose Fan mode.
•
Press
SPEED
button or
to select the fan speed.
•
The temperature and humidity cannot be set.
Dry (Dehumidifying) Mode
In this mode the compressor will operate but will not work to lower the room temperature. It works only to
remove excessive humidity present in the air.
•
Do not use the flexible exhaust tube, adaptors or adjustable window kit.
•
Press MODE button or
to choose Dry mode.
•
The fan speed and room temperature cannot be adjusted.
•
LED display will show ambient room temperature.
•
When the water tank is full, the
WATER FULL
indicator will illuminate and the compressor will shut off
automatically. The fan will remain circulating the air. At this time, you must empty the water tank as
described in the drainage section.
9