7
4.
Appropriate use
TD420M series condensate drain is intended exclusively for the following purpose:
Draining condensate from compressed air system (air compressors, air receivers/pressure
vessels, air dryers and air filters).
Any other form of use or one going beyond this shall be considered as inappropriate. We shall have
no liability whatsoever for any damage incurred as a result.
5.
Installation
Warning due to a sudden release of pressure!
High pressure could be dangerous and hazardous to the operator.
Before installing the device, check that the system is not under
pressure. Wear necessary personal protective equipment and keep
follow the safety rules when working with pressure equipment.
Condensate drainer can be assembled in many
ways. However, you must follow the
arrows on
valves
from inlet pointing to the outlet. You have
to screw the parts together. The bottle in the
picture left indicates where you have to use the
seal, such as Loctite 542. On other joints you can
also use a seal, although friction sealing will be
enough (well tighten the joints).
1)
2)
Maximum torque for
tightening screws