7. Use and maintenance manual
B01.15-B02.42
San Maurizio C.se - 16/12/2020
www.omcr.it
LIFTING
BRACKET ART.
NUM.
NR. SCREWS
SCREWS DIN
912 CL. 8.8
CLAMPING COUPLE
[Nm]
B01.15.0600
4
M12x45
87,28
B01.15.1000
4
M16x55
210,8
B01.15.2000
4
M20x80
411,9
B01.15.4000
6
M16x45
210,8
B01.15.7000
6
M20x60
411,9
Pic.1
DIE AXIS
LIFTING PIN B02.42.
BARRIER TO AVOID
THE WRONG PINS INSERTION
SCREWS DIN 912 CL. 8.8
PIN INSERTION DIRECTION
WARNING
The missing respect of the prescriptions included in this manual may cause the accidental fall of the load.
WARNING
3.3
At the moment of the use, check the correct screws clamping and the use of screws with the
required lengths; in the following table are written down screws and clamping couples for the
fixing of the lifting brackets;
it is recommended to use threadlocker LOCTITE 243 or lock
washers
.
Absolutely ensure a minimum screws clamping of 1 x Ø screw.
Example: for M36 screws use a minimum clamping of 36 mm.
B01.15. lifting brackets should be mounted on steel plates (minimum quality Fe510, S355)
.
It is recommended to provide barriers to avoid the wrong pins insertion
(see
Pic.1
).
WARNING
3.4
3.4.1 - APPLICATION ON FLAT SURFACE
