- 7 -
SMART LOCK
(PATENTED)
Tightening strength adjustment button (yellow).
-
+
Adjustment
knob
+
Rotate clockwise to
increase
the clamping force
-
Rotate counterclockwise
to
decrease
the clamping force
Maintenance
- The regular cleaning and lubrication of the SMART LOCK
components grant a long-lasting correct functioning of the tool.
1
- Clean the expanding nut with the metallic brush or use the standard
supplied cleaning brush for Smart Lock.
2
- Blow compressed air to remove dirt.
3
- Clean the clamping chuck inner surface using the standard supplied
cleaning brush.
4
- Blow compressed air to remove dirt.
-Periodically lubricate all moving mechanical parts with CRC or similar.
- The replacement of 2 rubber rings (OR 3093) is recommended every
12 ÷ 18 months use of SMART LOCK.
EN
- USE AND MAINTENANCE INSTRUCTIONS
Tightening adjustment
The clamping force of SMART LOCK could be loosened after a long time use by a progressive wearing of some
components, this revealed by a progressive slack of the locking lever.
To restore / increase / decrease the SMART LOCK tightening: press the yellow adjustment button and, by means of the
adjustment knob (standard supplied), start turning manually the conical terminal thus acting on the expanding nut. Then,
release the button and keep on turning the conical terminal until the button pops up again.
