11
Maintenance
•
If you only need to replace the compressor kit, remove the rear panel, locate the compressor, take the clip,
open the cover, replace the old compressor,
•
Reverse the above steps to reassemble.
•
If you need to replace the compressor, remove the rear cover, and cabinet, locate the compressor.
•
Unplug the lines and take out the grounded line, add the low side access valve, open the Process/Suction,
evacuate refrigerant, take out the compressor, replace a new one, joint together, then recover refrigerant,
weigh in the nameplate charge.
•
Reverse the above steps to reassemble.
