12
Installation and Operation
Check the presence:
• Of strange noises.
• Of oil trails on the ground and on the Archimedean
screw.
If there are strange noises, for example a seizing
of mechanical break, stop immediately and
contact maintenance personnel. Check during
work and at the end of every use. Check if there
are oil trails present. If there are any fluid drops,
stop immediately and contact maintenance
personnel.
Possible changes in parts must happen with manufacturer original parts or at least of quality, safety and
equivalent characteristics. For analysis, contact the Authorized Assistance Center.
PUT IN FUNCTION
The machine operator can put in function the machine if:
1. Positive check of preliminary operations.
2. Positive check of electric feeding.
3. Connection in power socket.
4. For the functioning of the GRATER GROUP.
a. Positive check of the direction of grater roll rotation.
b. Positive check result and verifications.
c. Concluded all checks and verified all safety instruments.
d. Place a gathering at the basin of the machine in correspondence of the food exit zone.
e. Activate the machine using the control device, turn to “1”.
f. Introduce manually the food product within the grater mouth and drive it towards the grater roll by
lowering the pressure roll.
g. At the end of the food product introduction, or when there is no room left in the basin, stop the machine
using the control device, turn to “0”.
It is recommended to not use the machine without food product.
SWITCHING OFF
Switching off the machine is completed as follows:
1. Before switching off, wait until all food has exited the machine.
2. Stop the machine by using the control device and switching it to “0”.
3. Disconnect the machine plug from the feeding socket.
4. Perform the cleaning interventions.
UNBLOCK IN CASE OF OBSTACLE
During the normal function of the machine, introduction of hard and dry products could block the machine. The
same result can occur if the electric feeding is broken. To be able to resume normal function, the blocked food
product must be removed manually or the power cable is restored.
Summary of Contents for GR-IT-0373
