14
Operation
Maintenance
6. When lit, turn the control knob to the desired setting.
7.
Your griddle is equipped with continuous ignition. Simply turn the control knob next to the lit burner to hi. It
will light automatically. There is no need to press the igniter again. Adjust the control knob(s) to the desired
setting.
MANUALLY LIGHTING THE MAIN BURNERS WITH A MATCH STICK
1. Ensure all burners are in the off position.
2. Slowly turn on the gas at the LP tank valve if it is not already on.
3. Place a match in the match holder located in the top center drawer of the grill cabinet underneath the right
main burner.
4. Use the holder to slide the lit match through the cooking grates and the front of the heat tent to the left of
the burner you wish to light.
5.
Press and turn the burner control knob to “HI/LIGHT”, continue to push in and hold up to 5 seconds or until
the burner lights.
6. If the burner does not light within 5 seconds, turn the burner control knob to off. Wait 5 minutes for the gas
to clear, and try again.
7. When lit, turn the control knob to the desired heat setting.
TURNING OFF YOUR GRIDDLE
1. Turn off the gas supply at the LP tank by turning the valve clockwise.
2. Turn all burner control knobs to the off position.
CLEANING YOUR GRIDDLE
WARNING
1. Do not clean any part of your griddle in a self cleaning oven.
2. Do not use oven cleaners, abrasive kitchen cleaners, cleaners that contain citrus products, or mineral
spirits.
3. Do not use any type of steel bristled brush.
4.
Clean your griddle regularly to stop grease build ups and avoid a grease fire or excessive flare ups.
5. Always allow your griddle to cool down before cleaning.
OTHER EXTERIOR SURFACES
- Was with a mild dish soap and warm water. A cloth, soft brush, or plastic
cleaning pad can be used. Rinse thoroughly and wipe dry.
GREASE PAN
- Check after use. Remove and clean the pan as grease builds up. It can be washed with warm
water and mild dish soap.
