10
Assembly Instructions
Installation
STEP 9
Install the knob(5)-4PCS onto the body. Assemble
extension wire(13) on front side of the body using
BOLT pre-assembled on the control panel. Then
install the battery into the ignitor.
TRANSPORTATION AND STORAGE
1. Place dust cap on cylinder valve outlet whenever the cylinder is not in use. Only install the type of dust cap
on the cylinder valve outlet that is provided with the cylinder valve. Other types od caps or plugs may result
in leakage of propane.
2. Do not store in a building, garage, or other enclosed area.
3. Always store your cylinder outside.
4. Store out of reach of children.
5. Always transport in an upright position.
6. Do not smoke when transporting your cylinder.
REGULATOR AND LP CYLINDER CONNECTIONS
CAUTION
The gas pressure regulator provided with this outdoor cooking appliance must be used. This regulator is set for
an outlet pressure of 11 inches water column.
Your regulator is equipped with a Q.C.C. Type 1 quick connect system. It will not allow gas to flow until a
positive seal has been made. It has a thermal element that will shut off the gas flow if the temperature reaches
240 degrees F (115 degrees C). It also has a flow-limiting device that will restrict the flow of gas to 10 cubic
feet per hour (0.28 cubic meters per hour).
