![background image](http://html1.mh-extra.com/html/omcan/d648bm2f/d648bm2f_instruction-manual_736194003.webp)
3
General Information
Installation
Safety
Omcan Manufacturing And Distributing Company Inc. and Food Machinery Of America, Inc. dba Omcan
are not responsible for any harm or injury caused due to any person’s improper or negligent use of
this equipment. The product shall only be operated by someone over the age of 18, of sound mind, and
not under the influence of any drugs or alcohol, who has been trained in the correct operation of this
machine, and is wearing authorized, proper safety clothing. Any modification to the machine voids any
warranty, and may cause harm to individuals using the machine or in the vicinity of the machine while
in operation.
IMPORTANT!!!PLEASE READ BEFORE INSTALLATION
• The refrigeration system operates most efficiently when installed in an area with cool, dry air circulation.
• There must be at least 6 inches of clearance on both sides and the back of the cabinet.
• Select a location away from the heat and moisture generating equipment such as stoves, ovens, etc.
• Avoid direct sun rays.
• Be sure that the floor where you intend to install that unit is strong and level enough to support the total
weight of the unit and its contents.
• To minimize shock and fire hazards, be sure that the unit is properly grounded. For your safety and
protection, all units are equipped with a special three-prong grounding plug on the service cord.
• All units are designed for indoor use. Outdoor use may cause significant damage to the unit.
• To minimize shock and fire hazards, be sure not to overload the outlet.
• To minimize electric shock and malfunction, do not spray the unit with water.
• To minimize fire hazards, do not use flammable spray products near the unit.
• After unplugging the unit, wait at least 6 minutes before re-plugging it. It may cause compressor failure if
plugged in before 6 minutes waiting period.
• Cautions for cleaning:
- Unplug the power cord before cleaning.
- Do not unplug-plug the power cord with wet hands.
- Do not use an abrasive cleaners, solvents or polishing agents on plastic parts. Doing so might cause
cracking or discoloring.
• When it is not in use:
- Unplug the power cord.
- Wipe inside with dry cloth, and you may leave the door slightly open to eliminate moisture and odor.
Summary of Contents for D648BM2F
