Omcan CD-GR-1500, Instruction Manual

Page: 6 / 28

6
Installation
The unit should be installed by licensed and approved personnel according to all local codes.
This dishwasher is delivered with water inlet and outlet hoses.
Be sure all electrical supply specifications correspond to information label on machine.
The manufacturer/ distributor is not responsible for any possible damages or risks due to improper connection
of this appliance.
INSTALLATION SUGGESTIONS
• Place the dishwasher in the desired location.
• The appliance should leveled. Adjustable feet are provided for this adjustment.
Note
The leveling feet should not have any exposed threads. Please use the provided bushes in
order to cover the exposed threads.
WATER SUPPLY CONNECTION
ATTENTION: Connection with the water supply should be made according to all applicable codes.
This dishwasher intended for use with a hot water supply but will also operate (at slightly reduced hourly
capacity) with a cold water supply.
• The water supply hose/pipe should be ½” or ¾” and terminate in a ¾” NPT fitting (not garden hose).
• The water supply hose/pipe should be flushed before final connection.
• Minimum flow pressure is 30 PSI (2 bars) and maximum is 75 PSI (5 bars).
• Connect hose supplied with machine to the inlet at the rear of the machine and the ¾” NPT fitting on the
water supply line.
Note to plumbing installer: If local codes require a vacuum breaker, one must be locally supplied and
Technical Specifications
Door Clearance 16” / 406mm
Dimensions (DWH) 32.6” x 26” x 54.3” / 828 x 660 x 1379mm
Packaging Dimensions 30” x 35” x 57” / 762 x 889 x 1448mm
Weight 245 lbs. / 111.1 kgs.
Packaging Weight 266 lbs. / 120.7 kgs.
Item Number 45220