Omcan CD-GR-1500, Instruction Manual

Page: 11 / 28

11
Maintenance
MAINTENANCE / CARE / REPAIR
Proper operation and safe use may be ensured only through the correct use of the appliance, as well as
the compliance with the operation instructions, the corresponding specifications and the care and cleaning
indications.
Notice: Before cleaning or performing any maintenance, other than daily interior cleaning, power and water
supply must be turned off. The appliance should never be sprayed with water or high pressure cleaning
solution, because any water or solution which may get into the electrical components will affect operation of the
appliance as well as present a potential for electrical shock. No safety systems should be disabled.
REGULAR MAINTENANCE AND CLEANING WORKS
Depending on local water hardness, the nozzles on the rinse arms should be cleaned regularly. Caution must
be exercised to not damage the nozzles.
PAY ATTENTION TO THE CORRECT POSITION OF FILTERS AND WASH ARM INSTALLATIONS AND BE
SURE NON-STICK BUSHINGS ARE NOT WORN.
Clean the appliance with warm water and conventional cleaning aids.
Stainless steel parts should never be cleaned them with “steel wool” , wire brush, etc, since even the lightest
contacts on the surfaces with steel may contaminate the stainless steel and cause rust formation. Use brushes
made of polymer plastic, natural bristles, or thin brass wire. Always keep brush movements in line with grain in
the Stainless Steel so that you will not affect the appearance. Finally, rinse with clean water and dry thoroughly.
We remind you that corrosion (rust formation) on stainless steel surfaces is not created by itself, but
rather due to the use of improper cleaning products (e.g. whitening or particularly caustic cleaning
products based on chlorine). Occasionally calcium sediments will form on the internal walls of the
dishwasher (due to mineral particles in the water), which may affect the correct operation of the
appliance and requiring regular removal.
SPARE PARTS, ACCESSORIES AND COMPONENTS
Spare parts and components are usually available at the authorized local service agency, or directly from
Omcan, In case of claims or complaints, you must supply the model and serial number of the appliance /
machine found on the specification label of the appliance.