background image

6

Operation

FRUIT SMOOTHIES

1.  Ingredients: Ice, Fruits, Water.

2.  Put the material into the container; cover with the lid; when making thick drinks, please insert the blending 

stick.

3.  Set the variable button to the lowest speed, then turn on, gradually increasing to the highest speed.

4.  Turn on the unit; if water is limited, please use the blending stick.

5.  After 3-5 seconds, when the blending sound suddenly diminishes, the ingredients have been blended 

enough. Over blending will turn the ice into water.

BLENDING FRUIT & VEGETABLE

1.  Put fruit or vegetables and a little water into the container.

2.  Set the variable button to the lowest speed, then turn on, gradually increasing to the highest speed.

3.  Turn on the unit; after 4-6 seconds of blending, the ingredients should roll smoothly. Do not over blend.

Technical Specifications

FEATURES

This blender was developed based on years of experience and technology. The powerful motor with stainless 

steel blades are designed for blending various foods.

• 

The Industrial high-speed motor can reach a maximum speed of 29,000 rpm.

• 

The thermally protected motor is Fan cooled.

• 

The speed control is designed to provide a steady current, while protecting the motor.

• 

Over current protection system.

• 

Durable Stainless steel driven connector.

• 

Blades group is geared by ball bearings.

• 

Built with special durable materials and waterproof adhesive.

Model

BL-CN-0002-B

Power

2 HP / 1.5 kW

Current

15A

RPM

16,000 - 29,000

Jug Capacity

2 L / 2.1 QT

Endurance of Container

-40°C - 180°C / -40°F - 356°F

Electrical

110V / 60 Hz / 1

Weight

10.6 lbs. / 4.8 kgs.

Dimensions

8.8” x 7.5” x 20.3” / 222 x 191 x 514mm

Item Number

23997

Summary of Contents for BL-CN-0002-B





















Reviews: