Omcan 45923, Instruction Manual

Page: 8 / 20

8
Operation
Maintenance
able as an option. Fig.8.
HOW TO STOP THE MACHINE
The appliance is stopped:
1. By pushing the “On/Off” push button (9).
2. By unplugging the mains cord plug (22).
DETECTION OF HARD FOOD
The machine can detect when hard food is inserted inside. In this case, it automatically performs up to 3 suc -
cessive reciprocating movements to try and unblock the screws. If after this operation, there is still local friction,
the machine will stop. It is then necessary to take down the screws and clean them.
JAMMING
Food may get jammed in the screw and prevent more from going through. You are advised to perform a back-
ward operation for a few seconds by pressing the backward operation button (10) for a few seconds. Repeat
this operation several times as required. If the jam persists, take down the screws and clean them.
CLEANING
Handle the sieve (13) and the screws (11/12) carefully so as not to put them out of shape thus preventing the
machine from working properly. To clean the sieve (13), it is recommended to use the brush (23) supplied with
the machine, for proper cleaning of the filter sieve holes. Do not use abrasive sponges for cleaning the ma -
chine. Take down the seals (16), (18), (20) and (21) to clean them with the brushes (23) and (24) and put them
back as shown in the photos Fig.17, Fig.9, Fig.22, and Fig.20. Cleaning will be easier if you do not wait for the
food remains to dry in the moving parts of the machine.
PRECAUTIONS AND RISKS
Do not place any objects other than food in the machine. During preparation, the level in the pulp container (5)
should be monitored to prevent the pulp outlet from clogging. Such clogging could result in a machine dysfunc-
tion. The quantity of products to be processed before reaching the maximum filling level in the container (5)
varies according on the products being processed.
MOTOR OVERHEATING SAFETY FEATURE
In the event of one of the 2 motors overheating, the appliance stops automatically. The safety features have an
automatic reset, so wait for the motors to cool (15 to 30 minutes), before restarting the machine. If the problem
persists, switch off the power supply to the machine (unplug the cord from the mains socket (22)) and call in
the maintenance service or contact a Omcan approved dealer.