Omcan 45923, Instruction Manual

Page: 7 / 20

7
Technical Specifications
Operation
Model SANTOS 65
Power 650 W
Electrical 120V / 60Hz / 1
Current 5A
RPM 80 RPM
Dimensions 9.3” x 16.2” x 25.3” / 236 x 411 x 643mm
Weight 61.7 lbs. / 28 kgs.
Packaging Weight 70.5 lbs. / 32 kgs.
Item Number 45923
STARTING UP
ASSEMBLY AND PREPARATION
1. Fit the scrapers (15) around the sieve (13) and insert the assembly into the bottom of the bowl (1). Fig.6.
Careful: line up the pins of the bowl (1) with the housings of the sieve (13). Fig.7.
2. Turn over the bowl (1) and fit the ring (19), the seal (18) before screwing in the discharge cone (17). Fig.9
and Fig.10.
3. Place the bowl (1) on the machine.
4. Position the bottom screw (12). Fig.11.
Careful: position the 2 bosses of the screw (12) in the 2 housings of the scrapers (15). Fig.14.
5. Position the top screw (11). Fig.12.
6. Turn the unlocking lever (6) a quarter of a turn and lower the cover (2).
Careful: if the cover (2) is not locked (unlocking lever not aligned with the appliance, Fig.13), raise it
and turn the top screw slightly (11) or check the position of the internal screw (12).
7. Position the feed channel (3). Fig.15.
8. Install the scrap bucket (5).
9. Connect the power supply cord plug (22) to your mains support socket. Fig.16.
10. Remove the fruit plunger (4) from the feed channel (3).
USE
1. Place the recipient under the bowl spout (1).
2. Start the machine, by operating the “On/Off” button (9).
3. Introduce the food into the feed channel (3) and, if required, push it down with the fruit plunger (4).
4. Continue this operation until the juice recipient is full or all the fruit and vegetables to be processed have
been used. Also keep an eye on the level of pulp in the pulp container (5).
SIEVE
The appliance comes with a sieve (13) with small holes for juices. A sieve (14) with big holes for coulis is avail -