MT-MR PLATINUM. POINT TO POINT AURAL RADIO RELAY SYSTEM
32
MT-MR PLATINUM
POINT TO POINT AURAL RADIO RELAY SYSTEM
chapter V
INSTALLATION AND OPERATION OF AURAL LINK
5.1.- Installation and Checks.
1.- Unpack receiver & transmitter equipments and verify that all controls, modules, displays, etc. and the cabinets
itself are intact and free of blemishes, scratches, etc. Otherwise, operate as established by Law. Verify the integrity
of antennas & transmission lines. Divide the equipments who are going to be installed to both stations, i.e.
transmitter & receiver stations.
2.- Before sending equipments & accesories to the correspondent stations, make an operative test. Connect
transmitter & receiver back-to-back in the following way:
SYSTEM BACK-TO-BACK CONNECTION
Description of Setup components is the following:
1.- Transmitter.
2.- Receiver.
3.- Audio Baseband Tone Generator. Calibrated 0 - 100 KHz. Connected to Stereo Baseband input ( BNC
connector).
4.- Decade Variable Calibrated RF Attenuator. It must withstand the 10 watts of RF power from Transmitter.
5.- Coaxial 75 ohms cable.
6.- RF low-loss 1/2" coaxial cable. 50 ohms.
