www.microscopenet.com
1
i.
Caution
1. Open the carton carefully with a knife or paper cutter.
Find the “UP” sign and place
the Styrofoam container on the side that makes the arrow upward. If the
“UP” sign
is missing, please open the Styrofoam container gently to prevent any accessory
items (i.e. objectives or eyepieces) from dropping and being damaged.
2. Do not discard the molded Styrofoam container. The container should be retained
should the microscope ever requires reshipment.
3. Keep the instrument out of direct sunlight, high temperature or humidity, and dusty
environments. Ensure that the microscope is located on a smooth, level and firm
surface.
4. If any specimen solutions or other liquids splash onto the stage, objective or any
other component, disconnect the power cord immediately and wipe up the spillage.
Otherwise, the instrument may be damaged.
5. All electrical connectors (power cord) should be inserted into an electrical surge
suppressor to prevent damage due to voltage fluctuations.
6. For safety when replacing the LED light and the fuse, be sure the main switch is
off, unplug the power cord, and replace the LED light and the fuse.
7.
Important:
confirm that the input voltage indicated on your microscope
corresponds to your line voltage (voltage switch is located on the back of the
microscope). The use of a different input voltage than indicated will cause severe
damage to the microscope.
