Omarv TSR MEGA 320, Use And Maintenance Manual

Page: 29 / 34

29
MAINTENANCE MAINTENANCE MAINTENANCE MAINTENANCE
1
11
1.... Automatic belt turnbuckle
Automatic belt turnbuckle Automatic belt turnbuckle
Automatic belt turnbuckle
If necessary, the spring tension must be increased by means of lever A.
Check the spring tension:
•
after the first ½ hr of work
•
after the first 8 working hours
•
every 20 working hours
2 22 2.... Cutters Cutters Cutters Cutters
Check daily that there are no broken cutters.
If there are, replace it with the one diametrically opposite, in order to maintain
a correct tractor balance.
Do not wait until the cutters are excessively worn before replacing, as it causes:
•
more power to be used
•
vibrations that are detrimental to the rotating parts of the chopper.
3 33 3.... Counter Counter Counter Counter----cutter cutter cutter cutter
Regularly check its condition and clean, especially when the vegetation is damp.
4 44 4.... Storage Storage Storage Storage
Before storing the machine:
•
Wash it thoroughly
•
Check the parts subject to wear (cutters, belt)
•
Spray a fine film of oil or diesel over the entire machine to protect it
against rust