Omarv TSR MEGA 320, Use And Maintenance Manual

Page: 19 / 34

19
CARDAN JOINT (DRIVE) ASSEMBLY CARDAN JOINT (DRIVE) ASSEMBLY CARDAN JOINT (DRIVE) ASSEMBLY CARDAN JOINT (DRIVE) ASSEMBLY
•
Check that the PTO shaft does not make contact with the guards at the
shortest point ( in general horizontal PTO shaft parallel to the PTO exit)
-Fig.4-
•
If it does, reduce the tubes by the same length (cut, clean, grease) –Fig.5
form A to B-
•
It is essential that a general check be made in the event of modification of
the length of the third point or in the event of tractor substitution.
C
C C C
AUTION AUTION AUTION AUTION
!!!! These operations must be undertaken slowly and with the greatest of
care in compliance with the safety regulations laid down in this manual.