Rif. UMA800081C - 06/22
IT
EN
EN -
23
OMAL S.p.A.
Headquarters
: Via Ponte Nuovo, 11 - 25050 Rodengo Saiano (BS) Italy •
Production Site:
Via Brognolo, 12 - 25050 Passirano (BS) Italy
Ph.
+39 030 8900145 •
Fax
+39 030 8900423 • [email protected] •
www.omal.com
INSTRUCTION MANUAL
AGO: SCOTCH–YOKE PART TURN PNEUMATIC ACTUATOR
DA2880 - DA8000 - SR1440 - SR4000
6) MATERIALS AND THEIR DURABILITY
The OMAL S.p.A. actuators are designed to have minimal maintenance-free resistance, in accordance with EN 15714-3, as shown
in the following table:
Nominal Torque (a)
Nm
Least number of cycles expected for
pistons and cylinder (b)
Least cycle rate from 0-90°
in seconds “s”
≤125
500 000 (c)
3
≤1 000
500 000
5
≤2 000
250 000
8
≤8 000
100 000
15
≤32 000
25 000
20
≤63 000
10 000
30
≤125 000
5 000
45
≤250 000
2 500
60
a
on the basis of EN ISO 5211.
b
a cycle is made up of nominal 90° in both directions (90° to open + 90° to close). For values other than 90 ° as working angle,
the duration is to be arranged between the manufacturer and the user.
c
For thermoplastic actuators, the least number of cycles is 250 000.
Note: Values based on a load of at least 60% of the stroke torque at 0,55 MPa 5,5 bar supply and according to the test procedure
described in attachment A of the EN 15714-3 standard.
