26
C
– SAFETY INSTRUCTIONS
-
This device must be installed in accordance with current regulations and used only in a
well-ventilated area. Consult instructions for setting up the device and before use.
-
The device is made for industrial use and should only be used by personnel trained in
the device
.
-
Do not interfere with the device without using appropriate protective equipment.
-
While the device is running, do not push into the chamber with bare hands, moving parts,
screwdriver, etc. It is dangerous and prohibited to interfere with the tools.
-
For the long lasting of the device, never run it idle for a long time. When the device is
not used, it must be turned off. In long-term use, the device should be turned off and
rested for at least 10 minutes every 2 hours
.
-
Because of any reason if there is a fire or flame flare where the appliance is used, turn off
all gas valves and electric contractor switch quickly and use fire extinguisher. Never use
water to extinguish the fire.
-
Damages caused by lack of grounding connection will not be covered under warranty.
-
Do not use non-original spare parts on the device. In case you use for the device spare
parts not supplied by our company, the device will be out of warranty.
