Antenna Switching Menu
If you have 3
rd
party external antenna switch connected to PA ( i.e. Microham TEN SWITCH)
you need to configure assignment of each port to specific band/antenna.
By pressing SET and scrolling to ANTENNA SETTINGS and confirming by SET you get
current band and its antenna selection. By scrolling UP / DWN you can select BAND which
you want to assign to current ANTENNA selected.
Then we select how many antennas we want per current band (1 or 2) always confirm your
selection by pressing SET. The by scrolling UP / DWN you assign which PORT is used on
your external antennas switch for this particular antennas. (ANT 1 ON PORT 01)
Shall you decide to use 2 antennas for this band then after confirming that with SET
configuration continues to other antenna selection / port selection.
To finish Antennas switch configuration you can either press AUTO or MAN
Summary of Contents for OM2500 A
