10
Rear view of the amplifier OM1006
RF Output
RF Input
AC Power Socket
PS Fans
LAN
- Local Area Network connection for REMOTE CONTROL of PA (for future use)
PREAMP
- RCA Phono, +12V / 100mA for an external RX preamplifier switching
CAUTION
If you are using an older transceiver or transmitters without time delay, we recommend
to connect the PA in such a way that the transmit/receive switch (foot switch for
example) is connected with the KEY IN socket of the amplifier. The KEY OUT socket is
to be connected with the PTT socket at the transceiver.
The amplifier is equipped with two safety devices, which ensure that the output relay is not
switched under power mistakenly (hot switching).
KEY IN -
RCA Phono
–
Input signal PTT (switching voltage / current 5V /2 mA)
KEY OUT -
RCA Phono – Output signal PTT (maximum switching of 50V / 100mA)