![background image](http://html.mh-extra.com/html/olympus/xz-10/xz-10_instruction-manual_734954083.webp)
83
EN
SAFETY
PRECAUTIONS
9
USB-AC adapter
USB-AC adapter
•
The included USB-AC adapter F-2AC is designed to be used
only with this camera. Other cameras cannot be charged
with this USB-AC adapter.
•
Do not connect the included USB-AC adapter F-2AC to
equipment other than this camera.
•
For plug-in type USB-AC adapter:
The included USB-AC adapter F-2AC is intended to be
correctly orientated in a vertical or fl oor mount position.
Use Only Dedicated Rechargeable Battery,
Use Only Dedicated Rechargeable Battery,
Battery Charger and USB-AC adapter
Battery Charger and USB-AC adapter
•
We strongly recommend that you use only the genuine
Olympus dedicated rechargeable battery, battery charger
and USB-AC adapter with this camera. Using a non-genuine
rechargeable battery, battery charger and/or USB-AC
adapter may result in fi re or personal injury due to leakage,
heating, ignition or damage to the battery. Olympus does not
assume any liability for accidents or damage that may result
from the use of a battery, battery charger and/or USB-AC
adapter that are not genuine Olympus accessories.
Monitor
Monitor
•
Do not push the monitor forcibly; otherwise the image may
become vague, resulting in a playback mode failure or
damage to the monitor.
•
A strip of light may appear on the top/bottom of the monitor,
but this is not a malfunction.
•
When a subject is viewed diagonally in the camera, the
edges may appear zigzagged on the monitor. This is not a
malfunction; it will be less noticeable in playback mode.
•
In places subject to low temperatures, the monitor may take
a long time to turn on or its color may change temporarily.
When using the camera in extremely cold places, it is a good
idea to occasionally place it in a warm place. The monitor
exhibiting poor performance due to low temperatures will
recover in normal temperatures.
•
The monitor of this product is manufactured with high-quality
accuracy, however, there may be a stuck or dead pixel on the
monitor. These pixels do not have any infl uence on the image
to be saved. Because of the characteristics, the unevenness
of the color or brightness may also be found depending on the
angle, but this is due to the structure of the monitor. This is not
a malfunction.
Legal and Other Notices
Legal and Other Notices
•
Olympus makes no representations or warranties regarding
any damages, or benefi t expected by using this unit lawfully,
or any request from a third person, which are caused by the
inappropriate use of this product.
•
Olympus makes no representations or warranties regarding
any damages or any benefi t expected by using this unit
lawfully which are caused by erasing picture data.
Disclaimer of Warranty
Disclaimer of Warranty
•
Olympus makes no representations or warranties, either
expressed or implied, by or concerning any content of these
written materials or software, and in no event shall be liable
for any implied warranty of merchantability or fi tness for
any particular purpose or for any consequential, incidental
or indirect damages (including but not limited to damages
for loss of business profi ts, business interruption and loss
of business information) arising from the use or inability to
use these written materials or software or equipment. Some
countries do not allow the exclusion or limitation of liability
for consequential or incidental damages or of the implied
warranty, so the above limitations may not apply to you.
•
Olympus reserves all rights to this manual.
Warning
Warning
Unauthorized photographing or use of copyrighted material
may violate applicable copyright laws. Olympus assumes no
responsibility for unauthorized photographing, use or other
acts that infringe upon the rights of copyright owners.
Copyright Notice
Copyright Notice
All rights reserved. No part of these written materials or this
software may be reproduced or used in any form or by any
means, electronic or mechanical, including photocopying
and recording or the use of any type of information storage
and retrieval system, without the prior written permission of
Olympus. No liability is assumed with respect to the use of the
information contained in these written materials or software,
or for damages resulting from the use of the information
contained therein. Olympus reserves the right to alter the
features and contents of this publication or software without
obligation or advance notice.
FCC Notice
FCC Notice
•
Radio and Television Interference
•
Changes or modifi cations not expressly approved by the
manufacturer may void the user’s authority to operate this
equipment. This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in
a residential installation.
•
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
•
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
•
Adjust or relocate the receiving antenna.
•
Increase the distance between the camera and receiver.
•
Connect the equipment to an outlet on a circuit different
from that to which the receiver is connected.
•
Consult your dealer or an experienced radio/TV technician
for help. Only the OLYMPUS-supplied USB cable should
be used to connect the camera to USB enabled personal
computers (PC).
Any unauthorized changes or modifi cations to this equipment
would void the user’s authority to operate it.
Summary of Contents for XZ-10
Page 88: ......
Page 89: ...VM923301 ...