7
How to install
When you install the adapter, also refer to your computer’s user manual and the manuals for any optional
devices you are using.
1
Turn on the computer
<98/98SE
⽧
Install>
Turn on the computer’s power (and connected devices, such as a monitor) to start Windows 98/98SE.
2
Download and install the device driver
<98/98SE
⽧
Install>
When using the adapter for the first time, you must first download and install the device driver from the
OLYMPUS web site.
Before installation, make sure that the computer is turned on, then follow the steps below to install the device
driver on the computer.
●
Note that the windows shown below may look different on your computer, depending on how your operating
system is configured.
Windows 98/98SE
1.
Open the web site, then follow the instruction to
download the device driver.
MAUSB-200 Device Driver Web Site :
http://www.olympus.com/
2.
When you double-click the file you downloaded,
the installation setup window appears first.
When the [InstallShield Wizard] window at right
appears, you can begin
installation.
Click the [Next] button.
●
If you want to cancel the installation, click [Cancel].
3.
During installation, the window at right appears.
●
The installation time may vary, depending on the
computer you are using.
Notes
DO NOT connect the adapter until
installation of the device driver is
completed.
