![background image](http://html.mh-extra.com/html/olympus/tg-6/tg-6_instruction-manual_734893125.webp)
Cautions
8
125
EN
Using Separately Sold Accessories
Attaching optional silicone jackets
Attach the jacket as shown. Reverse the steps to remove the jacket.
• Do not use excessive force. Failure to observe this precaution could damage the jacket.
Taking pictures with the Olympus Wireless RC Flash System
You can take pictures and underwater pictures with a wireless
fl
ash when using a
fl
ash
compatible with the Olympus Wireless RC Flash System.
The guideline of the setup range in wireless
fl
ash shooting is from 1 to 2 m, however
note that it varies depending on the ambient environment.
• The camera’s built-in
fl
ash is used for communication between the camera and
fl
ash.
• To use a dedicated underwater strobe, prepare an underwater case, a
fi
ber-optic cable
and so on.
• For details about operation of a wireless
fl
ash and an underwater strobe, refer to the
instruction manual for a special external
fl
ash or an underwater case.
1
Turn on the dedicated strobe.
2
Set the flash mode of the dedicated strobe to RC mode.
• When you have to set a channel and a group, select CH1 for the channel, A for the
group.
3
Highlight
fl
ash settings in live controls and select [
#
RC] (remote control).
• “Using a
fl
ash (Flash photography)” (P. 45)
4
Take a test shot to check the operation of the
fl
ash and the resulting image.
• Be sure to check the charge level of the camera and wireless
fl
ash before taking pictures.
• When the camera
fl
ash is set to [
#
RC], the camera built-in
fl
ash is used for
communication with the wireless
fl
ash. It cannot used for taking pictures.
• To take pictures with a wireless
fl
ash, point the remote sensor of the special external
fl
ash
toward the camera, and point the
fl
ash in the direction of the subject.
Summary of Contents for TG-6
Page 165: ......
Page 166: ...WD639600 date of issue 2019 05 ...