![background image](http://html.mh-extra.com/html/olympus/tg-6/tg-6_instruction-manual_734893097.webp)
Menu functions (Custom menus)
4
97
EN
Option
Description
g
8
( Beep sound)
Use
FG
to adjust the volume of the sounds made in
response to camera controls. Select “0” to disable sounds
such as those made when the camera focuses or the shutter
is released.
—
HDMI
[Output Size]: Selecting the digital video signal format for
connecting to a TV via an HDMI cable.
[HDMI Control]: Select [On] to allow the camera to be
operated using remotes for TVs that support HDMI control.
This option takes effect when pictures are displayed on a TV.
104
C
Exp/ISO
Option
Description
g
Exposure Shift
Adjust correct exposure separately for each metering mode.
• The effects are not visible in the monitor. To make
normal adjustments to the exposure, perform exposure
compensation (P. 41).
—
ISO-Auto Set
[Upper Limit / Default]: Select the upper limit and default value
used for ISO sensitivity when [Auto] is selected for ISO.
[Upper Limit]: Select the upper limit for auto ISO sensitivity
selection.
[Default]: Select the default value for auto ISO sensitivity
selection.
[Lowest S/S Setting]: Select the shutter speed below which
the camera will automatically raise ISO sensitivity in modes
P
and
A
.
If set to [Auto], the camera automatically sets the shutter
speed.
—
Noise Filter
Select the amount of noise reduction performed at high ISO
sensitivities.
—
Noise Reduct.
This function reduces the noise that is generated during long
exposures.
[Auto]: Noise reduction is performed at slow shutter speeds,
or when the internal temperature of the camera has risen.
[On]: Noise reduction is performed with every shot.
[Off]: Noise reduction off.
• The time required for noise reduction is shown in the
display.
• [Off] is selected automatically during sequential shooting.
• This function may not work effectively with some shooting
conditions or subjects.
—
Noise in images
While shooting at slow shutter speeds, noise may appear on screen. These phenomena
occur when the temperature rises in the image pickup device or image pickup device
internal drive circuit, causing current to be generated in those sections of the image pickup
device that are not normally exposed to light. This can also occur when shooting with a
high ISO setting in a high-temperature environment. To reduce this noise, the camera
activates the noise reduction function.
MENU
G
C
Summary of Contents for TG-6
Page 165: ......
Page 166: ...WD639600 date of issue 2019 05 ...