![background image](http://html2.mh-extra.com/html/olympus/tg-3/tg-3_instruction-manual_4307524021.webp)
21
EN
A
(iAUTO mode)
A full auto mode in which the camera automatically optimizes settings for
the current scene. The camera does all the work, which is convenient for
beginners.
1
Rotate the mode dial to
A
.
2
Press the shutter button halfway down to focus.
The camera was unable to focus if the AF target mark flashes red. Try
focusing again.
3
Press the shutter button all the way down to shoot.
k
(Microscope)
Images can be taken from up to 1 cm away from the subject. In this mode
you can shoot images with a large depth of field, and perform focus bracket
shooting of a set number of images.
1
Rotate the mode dial to
k
.
2
Use
HI
to select a sub mode and press the
A
button at the
end.
Sub mode
Application
m
Microscope Images can be taken from up to 1 cm away from the subject.
o
Focus
Stacking*
1
The camera shoots a number of images, automatically shifting
the focus in each image. These can then be combined into a
composite image with a large depth of field. Two images are
recorded, the first frame and the composite image.
p
Focus BKT
In this mode, the camera shoots a number of images,
automatically shifting the focus in each image. The number
of images and shooting steps are set in [Focus BKT settings]
(P. 64).
n
Microscope
Control
Changes the magnification level of the subject on the monitor.
The magnification level when the shooting distance is 1 cm is
displayed on the monitor. You can change the magnification
level by pressing the
I
button.*
2
At high magnification levels,
the image may be grainy.
*1 There may be situations in which it is not possible to create composite image
due to camera shake.
*2 Available only when Picture mode is [Vivid], [Natural] or [Muted].
3
Press the shutter button all the way down to shoot.
• You can shoot with a fixed focus position.
g
AFL (P. 34)