22
1
External View and Nomenclature
Finger hook
Stage plate
Specimen holder mount holes
(x 4)
Specimen holder
Tube
Seat
Same size as the stage plate.
Cup stage
Tilting limit angle : 30°
8-4 Cup Stage SZH-SC
The SZH-SC can be used only with reflected light illumination.
NOTE
2
Installation
Fit the cup stage seat into the stage plate mount hole of an applicable base.
Place the cup stage on the seat. Before placing, wipe the sliding surface on the cup stage and seat with a clean
cloth.
Mount the stage plate.
Mount the specimen holder.
Clean the sliding surface periodically.
1
2
3
4
TIP
Before mounting, remove dirt and dust from the mount surfaces and handle carefully so as not to
damage them.
STAD mount for ILLT SZX2-STADM is necessary for using the SZX2-ILLTQ/ILLTS LED transmitted light
illumination base. For details, refer to the instruction manual for the SZX2-ILLTQ/ILLTS LED.
Stage plate
Stage plate mount hole
Specimen holder
Specimen holder mount hole
Cup stage
Applicable base
Seat
Sliding surface
1
3
4
2
NOTE
TIP
Downloaded from