EN 17
En
Remove the filter from the digital camera
If a filter is attached to the lens of the digital camera, remove the filter before loading the digital camera
in the Case.
Prepare the digital camera.
Compatible digital camera?
This product (PT-E05) is exclusively for use with the E-520 Digital Camera.
Checking camera operation
Refer to the digital camera’s instruction manual for details on how to make sure the camera is operating
correctly.
Open the Case.
1
Slide and hold the slide lock towards the arrow direction (
1
) and turn the open/close dial counter
clockwise (
2
).
2
Turn the open/close dial to the position where it cannot be turned further.
3
Open the rear lid of the Case gently.
CAUTION:
The digital camera cannot be loaded in the Case while the filter is attached to the lens. Be sure to remove the
filter before loading.
CAUTION:
Do not exert too much force while turning the open/close dial. Doing so may damage the dial.
Slide lock
1
2
PT-E05_EN.Book Page 17 Wednesday, June 4, 2008 12:34 PM
