background image

EN 3

EN

For safe use

This instruction manual uses various pictographs for correct use of the 
product and to prevent danger to the user and other persons as well as 
property damage. These pictographs and their meanings are shown 
below.

WARNING

1

Keep this product out of the reach of babies, infants, and children. 
There is the possibility of occurrence of the following types of 
accidents.

• Injury by dropping onto the body from a height.
• Injury from parts of the body getting caught in parts which open and 

close.

• Swallowing of small parts, O-ring, silicone grease and silica gel. 

Please consult a physician immediately if any parts have been 
swallowed.

• Triggering of the flash in front of the eyes may cause permanent 

vision impairment etc.

2

Do not store with a battery in the digital camera housed in this product. 
Storage with a battery inserted may lead to leakage of the battery 
liquid and fire.

3

If leakage of water should occur with a camera installed in this product, 
quickly remove the battery from the camera. There is the possibility of 
ignition and explosion from generation of hydrogen gas.

4

This product is made of resin. There is the possibility that injuries may 
be caused when it becomes broken because of strong impact with a 
rock or other hard objects. Please handle it with sufficient care.

WARNING

This shows the content regarding assumption of 
possibility of human death or severe injury in case of 
handling with disregard of this indication.

CAUTION

This shows the contents regarding assumption of 
possibility of injury or damage to property in case of 
handling with disregard of this indication.

PT-057_EN.book  Page 3  Friday, November 21, 2014  10:13 AM

Summary of Contents for PT-057

































Reviews: