background image

http://www.olympus.com/

© 2003 OLYMPUS OPTICAL CO., LTD.

PT-016-2MJ-0503-01

San-Ei Building, 22-2, Nishi Shinjuku 1-chome, Shinjuku-ku, Tokyo, Japan

Customer support (Japanese language only): Tel. 0426-42-7499 Tokyo

OLYMPUS OPTICAL CO., LTD.

Two Corporate Center Drive, Melville, NY 11747-3157, U.S.A. Tel. 631-844-5000

Technical Support (USA)

24/7 online automated help: http://support.olympusamerica.com/
Phone customer support: Tel. 1-888-553-4448 (Toll-free)

Our phone customer support is available from 8 am to 10 pm
(Monday to Friday) ET
E-Mail: [email protected]
Olympus software updates can be obtained at: http://olympus.com/digital/

OLYMPUS AMERICA INC.

Premises/Goods delivery: Wendenstrasse 14-18, 20097 Hamburg, Germany

Tel. 040-23 77 33

Letters: Postfach 10 49 08, 20034 Hamburg, Germany                                          

European Technical Customer Support:

Please visit our homepage 

http://www.olympus-europa.com

 

or call our TOLL FREE NUMBER :  

00800 - 67 10 83 00

 

for Austria, Belgium, Denmark, Finland, France, Germany, Italy, Luxemburg, 
Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, United Kingdom 
• Please note some (mobile) phone services/provider do not permit access or 

request an additional prefix to +800 numbers. 

For all not listed European Countries and in case that you can’t get connected 
to the above mentioned number please make use of the following 
CHARGED NUMBERS:  

+49 180 5 - 67 10 83

  or  

+49 40 - 237 73 899

Our Technical Customer Support is available from 9 am to 6 pm MET (Monday to Friday) 

OLYMPUS OPTICAL CO. (EUROPA) GMBH.

Summary of Contents for PT-016







































Reviews: