background image

E-1

WARNING

Disclaimer

Unauthorized copying of this manual in part or in full, except for personal use, is prohibited. Unauthorized
reproduction is strictly prohibited.

Olympus shall not be responsible for damages, loss of profit or any claims by third parties in case of any
damage occurring from incorrect use of this product.

IMPORTANT - Please read the following before using the product

This product has been designed to be used underwater at depths up to 40 meters. Handle this product with care.

This product must always be used in combination with an applicable lens. Do not combine this product
with an inapplicable lens.

To ensure correct and safe use of this product, always use it as described in this instruction manual.

For safe use

This instruction manual uses pictographs to show how to use the product correctly and how to prevent danger to
the user and other persons as well as damage to property. These pictographs and their meanings are shown below.

Please pay particular attention to this information. If ignored when using 
the product, there is a risk of serious injury and even death.

WARNING

Ignoring this information when using the product could lead to injury or 
material damage.

CAUTION

This product should be kept out of reach of infants and children to prevent accidents such as the following:
• Injury caused by the product falling from a height and striking the body from a height.
• Injury caused by the swallowing of small parts. Please consult a doctor immediately if this happens.

This product is partly made of glass. If it is broken or smashed by being dropped or hit against a hard
object, glass splinters could cause injury. Please handle this product carefully.

If water gets into this product during underwater use, immediately stop using it, remove the moisture from
the product and detach it from the camera and lens.

Do not disassemble or modify this product. This may result in injury.

The silicone O-ring grease is not edible.

CAUTION

Do not expose this product to high temperatures for extended periods. This may lead to deterioration of
the product’s components.

When mounting this product on the PT-E series waterproof case, be sure to follow the steps described in this manual.

Before detaching this product from the PT-E series waterproof case, make sure that the case is com-
pletely dry and free of moisture.

Never attach or detach this product in locations where there is a lot of sand, dust or dirt. If any foreign matter
gets on the O-ring sections, the waterproof sealing will be compromised and water leakage may result.

This product has been designed and manufactured for use in a water pressure equivalent to a depth of
40 meters. Please note that diving in depths over 40 meters may cause irreparable damage and/or may
result in water leaking into this product and the camera and lens.

The maximum depth that this product can be used is 40 meters, regardless of what case it is combined
with. For example, even when combined with a PT-E series case certified for 60 meters, the maximum
depth is still limited to 40 meters.

When sealing this product, make sure that no foreign matter is caught on the O-rings or O-ring contact surfaces.

Before storing this product, always remove it from the camera and lens.

To control lens zooming from this product, the provided zoom gear must be attached to the zoom ring of
the lens. Correctly attach the zoom gear to the zoom ring of the lens as instructed in this manual.

Thank you for buying this product. To assure safe and correct use of this product, please read this instruction manual
carefully. After reading, store the manual together with the warranty card in a safe, easily accessible place.

This product is the Waterproof Lens Port (PPO-E05) designed exclusively for use with the PT-E series of
waterproof case.

Underwater zooming is made possible by attaching the zoom gear, provided with this product, to the
zoom ring of an applicable camera lens.

PPO-E05̲En  06.10.24  4:39 PM  ページ1

Summary of Contents for PPO-E05










Reviews: