E-5
Screw the camera table provided with the PT-E
series case firmly into the bottom of the cam-
era.
4
Loading the Camera and Lens
After installing the lens on the camera, insert these into the PT-E series case on which the PER-E02 and
the PPO-E04 lens port are mounted.
Remove the eyecup from the camera’s viewfind-
er. If a lens cap or filter is attached to the lens or
the strap is attached to the camera, remove them
as well.
Lift the PT- E series case’s power switch dial,
mode dial knob and zoom dial, and turn the
case’s camera table lock lever counterclock-
wise to release the lock. Refer to the PT-E
series case’s instruction manual for instructions
of how to attach the hot shoe cable for the
flash.
Zoom dial
Mode dial knob
Power switch dial
Camera table lock lever
Confirm that the camera’s power switch is OFF.
While pulling out the zoom dial on the PT-E
series case, slide the camera table with camera
attached as far as it will go into the camera
table mount on the inner side of the case’s front
lid.
MENU
Pull out the zoom
dial further.
