T-Series Flashes
Mounting the Flash
Electronic flash T20 (small-size flash with a guide
number of 20)
Electronic flash T32 (high-capacity flash with a
guide number of 32)
Slide the flash into the camera's accessory shoe and
lock it by turning knob until the flash is tight.
Make sure the flash is pushed fully forward, to
insure proper electrical contact.
* The electronic flash T45 and other flashes that
have no direct hot shoe contact cannot be used.
* If the flash unit switch is left on, the camera
batteries will be drained. Make sure to turn off
the flash switch after taking pictures.
57
Summary of Contents for PC I
